ITI Straumann Bone Level Straight Multi Unit Implant Abutment
ITI Straumann Bone Level® Titanium Multi unit Straight Abutment Compatible
NC 3.3mm/ RC 4.1mm
Desciption:
This staight abutment comes with a screw that takes a Straumann-Torx driver
This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Can production Custom interface
Approved by CE, ISO 9001, ISO 13485
| MULTI-UNIT® | A | C |
| 40.043/1 | NP (NC) | 1,5mm | 4,80 | 1,50 |
| 40.043/2 | NP (NC) | 2,5mm | 4,80 | 2,50 |
| 40.043/3 | NP (NC) | 3,5mm | 4,80 | 3,50 |
| 40.044/1 | RP (RC) | 1,5mm | 4,80 | 1,50 |
| 40.044/2 | RP (RC) | 2,5mm | 4,80 | 2,50 |
| 40.044/3 | RP (RC) | 3,5mm | 4,80 | 3,50 |
| 40.044/4 | RP (RC) | 4,5mm | 4,80 | 4,50 |
Product Description
ITI Straumann Bone Level ® Titanium Multi unit Straight Abutment are prefabricated, screw-retained intraoral abutments intended to be connected directly to endosseous implants in partially or fully edentulous patients for the retention of cast or milled bar overdentures. For implant-supported prostheses, six or more implants are recommended in the maxilla, four or more in the mandible. If clinical conditions dictate fewer implants, an implant-retained, tissue-supported prostheses is indicated. Multi-unit abutments are precisely machined from titanium alloy, and are available with a variety of collar heights to achieve optimal emergence from shallow or deep gingival wells. Each Inclusive Multi-Unit Abutment is shipped with a delivery carrier color-coded to indicate the restorative platform of the seated implant.
Straight multi-unit abutments lack any anti-rotational features at the implant-abutment interface. The apical portion of a straight multi-unit abutment is threaded for attachment with the internal connection of a seated implant. For abutment delivery, the occlusal surface features a male hex head compatible with the Inclusive Multi-Unit Driver.
Contraindications
The following conditions would contraindicate use of ITI Straumann Bone Level ® Multi-Unit Abutments: (a) greater than 45 degrees divergence from parallel for a splinted restoration when using 30-degree angled multi-unit abutments; (b) greater than 32 degrees divergence from parallel for a splinted restoration when using 17-degree angled multi-unit abutments. Angled abutments should not be used to restore small-diameter implants (less than or equal to 3.0 mm) in the posterior region.
Sterility
ITI Straumann Bone Level® Titanium Multi unit Straight Abutment are packaged NON-STERILE. Prior to use in the oral environment, they should be cleaned, disinfected, and sterilized before use.
Product Tags:
|
|
ITI Straumann Bone Level Straight Multi Unit Implant Abutment Images
|
